Skip to main content

Oakenheart Woodcraft

Search This Blog

Homemade woodworking tools

Get link
Facebook
X
Pinterest
Email
Other Apps

As was normal years ago, I make tools as needed and learn something from the process each time.

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Post a Comment

Popular Posts

Timber Framing Saw Horses

I spent the day helping my cousin and his friend fashion a pair of very heavy-duty saw horses for use in timber framing. Designed to support heavy timbers being worked, the posts and beams of the pieces are joined with double mortise and tenons for maximum strength. Load of air dried White Oak Timber Original used for reference Sawing the waste from the tenons Finished post with taper to transition with base piece. (foot) Even though the oak was still moderately wet, it took a lot of effort to chop out the mortises. Mortising chisels and a bigger mallet would of been proper here, though my Pfeil bench chisels did admirably. Just need the base pieces finished and pegs installed and these will be ready to support a truck. The tenons are intentionally left proud to help keep beams, and work in general, centered on the horse.

Greene and Greene style Adirondack chairs

5/4 Spanish Cedar and Black Walnut accents make up this project. Quite a bit of machine work required for the templates and parts, not my normal commissioned hand work project. The plans were adapted from an old magazine article, I had a print shop enlarge them, glued them to material and cut them out. This was a first for me, and I normally don't follow plans and cut sheets either. Deceptive in the amount of work involved. Before and after finish. I'm utilizing "One Time" finish, expensive, but it's guaranteed for 7 years, and application is easy. I modified the plans with a wedged through tenon for strength.

Trebuchet

My son and I wanted to build a project together, and decided on a trebuchet. I don't remember which one of us came up with that idea. Working on the long and short arm first After looking at pictures for design and sketching ideas, we decided to just make what we wanted, using the scraps available. We visited a great web based simulator here Our goal is to throw a golf ball 150 feet or so, and improve from there. Working on the basket. (and sweeping) Wheels, basket, bearing caps, etc. Cart is done, working on the stub axles and mounting thrust washers and wheels White Oak perpendicular bracing for the main axle Bearings pressed in and covers fitted The 5/8 steel rod are supported on roller bearings, the kind for garden carts. We invested $30 or so for axles, bearings and hardware. Ready for assembly and bracing Assembled and glued up. T...

Powered by Blogger